Table of Contents:
         • About Mold
         • Health Effects
         • Detection of Mold
         • General Clean-Up Procedures
         • Soap Cleanup
         • Disinfect Surfaces
         • Useful Publications
         • Referrals to Occupational & Environmental Clinics
         • For Further Help or Information

  Disinfect Surfaces 
 
         • Wear gloves when using disinfectants.
         • After thorough cleaning and rinsing, disinfect the area with a solution of 10% household bleach
            (e.g., 1 1/2 cup bleach per gallon of water). Using bleach straight from the bottle will not be more effective.
         • Never mix bleach with Ammonia - the fumes are toxic.
         • For spraying exterior large areas, a garden hose and nozzle can be used.
         • When disinfecting a large structure, make sure the entire surface is wetted (floors, joists, and posts).
         • Avoid excessive amounts of runoff or standing bleach.
         • Let disinfecting areas dry naturally overnight -- this extended time is important to kill all the mold.
 
CAUTION: Bleach fumes can irritate the eyes, nose, and throat, and damage clothing and shoes. Make sure the working area is ventilated well.
 
Can cleaning up mold be hazardous to my health? Yes. Exposure to mold can occur during the cleaning stage. Mold counts are typically 10 to 1000 times higher than background levels during the cleaning of mold damaged materials. Take steps to protect your health during cleanup:
 
         • When handling or cleaning moldy materials, consider using a mask or respirator to protect you
            from breathing airborne spores. Respirators can be purchased from hardware stores; select
            one for particle removal (sometimes referred to as a N95 or TC-21C particulate respirator).
            Respirators are not as effective removing bleach fumes, so minimize your exposure when
            using bleach or other disinfectants.
         • Wear protective clothing that is easily cleaned or discarded.
         • Use rubber gloves.
         • Try cleaning a small test patch of mold first. If you feel that this adversely affected your health,
            you should consider paying a licensed contractor or professional to carry out the work.
         • Ask family members or bystanders to leave areas when being cleaned.
         • Work over short time spans and rest in a fresh air location.
         • Air your house out well during after the work.
 
CAUTION: Never use a gasoline engine indoors (e.g. pressure washer, generator) -- you could expose yourself and your family to carbon monoxide.
 
Can Air Duct Systems become Contaminated with Mold? Yes. Air duct systems can become contaminated with mold. Duct systems can be constructed of bare sheet metal, sheet metal with an exterior fibrous glass insulation, sheet metal with an internal fibrous glass liner, or made entirely of fibrous glass. If your home's air duct system has had water damage, first identify the type of air duct construction that you have. Bare sheet metal systems, or sheet metal with exterior fibrous glass insulation, can be cleaned and disinfected.

If your system has sheet metal with an internal fibrous glass liner, or are made entirely of fibrous glass, the ductwork normally will need to be removed and discarded. Ductwork in difficult locations may have to be abandoned. If you have other questions, contact an air duct cleaning professional, or licensed contractor.

After I've cleaned everything as thoroughly as possible, can I still have mold odors? Yes. It is possible that odors may persist. Continue to dry out the area and search for any hidden areas of mold. If the area continues to smell musty, you may have to re-clean the area again (follow the cleaning steps given in this sheet). Continue to dry and ventilate the area. Don't replace flooring or begin rebuilding until the area has dried completely.
 
How can further damage to my home be prevented? Check regularly for the following:
 
         • Moisture condensation on windows.
         • Cracking of plasterboard.
         • Drywall tape loosening.
         • Wood warping
         • Musty odor
 
If you see any of the above, seek out and take steps to eliminate the source of water penetration, as quickly as possible.

Can Ozone air cleaners help remove indoor mold, or reduce odor or pollution levels? Some air cleaners are designed to produce ozone. Ozone is a strong oxidizing agent used as a disinfectant in water and sometimes to eliminate odors. However, ozone is a known lung irritant. Symptoms associated with exposure include cough, chest pain, and eye, nose, and throat irritation. Ozone generators have been shown to generate indoor levels above the safe limit. Furthermore, it has been demonstrated that ozone is not effective in controlling molds and fungi, even at high concentrations far above safe health levels. Also, ozone may damage materials in the home. For these reasons, the California Department of Health Services strongly recommends that you do not use an ozone air cleaner in any occupied residential space. Refer to the CDHS IAQ Info Sheet: Health Hazards of Ozone-generating Air Cleaning Devices (January 1998).